Accessories

Accessory
Number		 Accessory Description
LP Conversion Kit Please Refer To LP Conversion Index for Proper Kit Information
RXPF-F01 Fossil Fuel Kit
RXPF-F02 Fossil Fuel Kit (for TVA)
RXGY-E03 Vertical / Horizontal Concentric Vent Termination Kit
RXGY-G01 Direct Vent furnace Side Wall Vent Kit
Obsolete Beginning October 2008
RXGY-G02 2" Direct Vent Furnace Side Wall Vent Kit
RXGY-D02* Horizontal Two Pipe Kit
RXGY-D03*
RXGY-D04*
RXGY-H01 Left Drain Conversion Kit for Downflow Condensing Gas Furnace
RXGC-B17 NON-Combustible Floor Base
RXGC-B21 NON-Combustible Floor Base
RXGC-B24 NON-Combustible Floor Base
FP19 LP Conversion Kit 0' to 4,500' US/Canadian
FP21 LP Conversion Kit 0' to 4,500' US/Canadian
RXGF-CC External Filter Rack
RXGY-F29 High Altitude Kit for GTK-06
RXGY-F30 High Altitude Kit for GTK-07
RXGY-F31 High Altitude Kit for GTK-09
RXGY-F32 High Altitude Kit for GTK-10
RXGY-F33 High Altitude Kit for GTK-12
RXGY-B01 Condensate Pump Kit
RXGY-A01 Neutralizer Kit

HIGH ALTITUDE KIT*: Not available at this time.

*For installations over 5000 ft.

OPTION CODE FOR HIGH ALTITUDE: US & Canada - 278

CAUTION : Always follow National Fuel Gas Code (NFGC) guidelines when converting furnaces for high altitudes.

For all installations above 2000 ft. the burner orifice size needs to be recalculated and verified. See installation instructions for more information.

NOTE : For Canadian installations only, an optional derate (manifold gas pressure reduction) method may be used to adjust the furnace for altitude. See installation instructions for more information. This optional method may NOT be used for U.S. installations.
(U.S. Models--Kit packaged with furnace Requires field installation).

Accessory List Disclaimer Footnote.
NOTE: The information on this page is provided as an overview ONLY.
For Ordering Information, Please refer to the Applicable Specification Sheets to verify the information is correct.

Back