Outdoor Alarms and Alerts
Which Alarm do you have?
Reading Alarms and Alerts on the outdoor control board.
The ideal location to read alerts is at the EcoNet thermostat. However, knowing how to read faults while in front of the equipment may also be helpful. The dual seven segment LED can provide you with information as long as you have the key most of the time.
Some faults, especially 15 and 16 require you to either read the thermostat or look for a fault on the drive itself using the Yellow and Red LEDs. The display will also let you know operational codes.
Here are a list of codes you may see at the seven segment LED… Click on the one you have to find out more as you will be directed to the appropriate EcoNet Fault Page.
The Alarm or Alert I have is...
8: Identity Fault
15: Inverter Fault
16: Inverter Fault
21: Low Pressure
27: Low Line Voltage
28: High Line Voltage
29: High Pressure
31: Envelope Fault
35: Suction Thermistor Failure
36: Suction Pressure Sensor Failure
42: Compressor Sump Thermistor Failure
83: Coil Thermistor Failure
84: Outdoor Temperature Thermistor Failure
d1: Memory Card Data Write Failure
